10' x 3' (3.05x0.91m) Traditional Pent Tool Store Shed

In stock
Product code:

This 10x3 Traditional Pent Tool Store is made from enhanced timber which provides its superior quality.

  • Free Treatment
  • Quality Redwood T&g Cladding
  • Traditional Pent Tool Store Includes Felt, Fixings & Instructions
  • Key Operated Lock
You have already selected the date , if required you can change this date during checkout.
  • Detailed Specification
  • Description
  • Reviews 21
  • Delivery
More Information
Name 10' x 3' Traditional Pent Tool Store Shed
Assembly Time (estimated) 2-4 hours
Annual Treatment Yes - by Customer
Base Size Required (minimum) 3050 x 910
Brand Traditional
Cladding Thickness 12
Colour Brown
Delivered From Factory
Delivery Point Kerb-side or Driveway
Door Height 1460
Door Opening Height 1460
Door Type Single Door (hinged)
Door Width 762
Eaves Height 1610
External Depth 3050
External Width 910
Finish Planed (smooth)
Floor Material Tongue and Groove
Floor Thickness 12
Size 10' x 3'
Instructions Included Yes
Locking System Key Operated Lock
Packaged Format Flat-packed
Persons to Assemble 2 people
Ridge Height 1710
Roof Covering Felt
Roof Material Tongue and Groove
Roof Thickness 12
Roof Type Pent
Material Wooden
Treatment Dip Treated
Wall Cladding Tongue and Groove
Warranty 12 (parts) months

The 10x3 Traditional Pent Tool Store from the Treetops Traditional range. This 10x3 tool shed model is fully clad (no windows) with quality Deal Redwood 12mm PAR finished (16mm nominal) tongued and grooved (T&G) shiplap cladding, that enhances both the quality and appearance of the building. Internally, the building benefits from chamfered (rounded) edges upon the corners of the 44 x 27mm framing, in keeping with the high standard of construction throughout. For security this product is fully clad, thus light and access can only be provided by the gable end located 1.46m high x 0.757m (2'6") wide single door, securable be the provision of a key lock. As an upgrade in lieu of the single door, a 1.32m (4'2") wide double door can be fitted to the low side section, leaving both gable ends fully clad. Self-assembly by customer (instructions supplied). NB: Please be aware that this traditional pent tool store unit has a maximum height of 1.70m (5'7"), thus less headroom than a typical shed. Manufacturers advise that the building will require re-treating with 6 weeks of delivery/installation and annually thereafter with a quality wood preservative. Approximately 1 foot/300mm should be left around the entire building to aid air flow around the building and access to re-treat.

Only one door is included with this tool store shed unless the double door option is selected under options and choices.

Please note - This product has a 3 inch roof overhang on either side. This isn't included in the external size listed in the detailed specification.

  • Free Treatment
  • Quality Redwood T&g Cladding
  • Traditional Pent Tool Store Includes Felt, Fixings & Instructions
  • Key Operated Lock
  • Fully T&g Boarded
  • Erection Service*
Write Your Own Review
Your review

This product is delivered in a flat packed, sectional format from manufacturer direct to your home, with full instructions ready for DIY assembly.

We offer FREE delivery to the majority of mainland UK postcodes but some areas may incur an additional carriage charge and some postcode areas are not covered at all. Please check your postcode in the "postcode checker" above to confirm availability and any possible surcharges.

Delivery to every area of the UK cannot be made every day. Some postcodes fall into an extended lead time area. The extended delivery lead time will be in addition to the typical lead time stated.

If you will be unavailable on the day of delivery the driver can attempt to leave your order in a safe place, please indicate this when placing your order or booking in your delivery as re-delivery charges may be levied if the delivery fails on the date agreed. The delivery team will contact you to arrange an acceptable delivery date based on the typical lead time stated for the product.

Upon Delivery:

Delivery of this item is typically made by a 3.5 ton or 7.5 ton flat-bed (similar size to a council refuse lorry). Delivery is typically between 7am and 7pm. Unfortunately, we are unable to specify a timed delivery.

The drivers are only insured to deliver to kerb side or driveway. We would not risk damaging your property whilst delivering a product to an unsafe location. Unfortunately we will not be able to go through your property.

Please Note - delivery is NOT available to the following locations:

Isle of Wight, Isle of Man, Northern Ireland, Channel Islands, Isles of Scilly, Scottish Islands and these postcode areas; AB, DD, FK, IV, KW, KY, PA and PH.